Technical Specifications - Philips SCM4480 Manual Del Usuario

SCM4480 12-09-2007
4 Functional overview (fig. A)
PHILIPS
1
• Lights up when a 5V device is charging (when no
device is connected, the PHILIPS logo will flash).
• Flashes when the device is fully charged.
Foldable power plug
2
Connects to the wall outlet.
USB port
3
Connects to 5V DC devices (mobile telephones,
MP3 players, etc.).
5 Operation
Charging devices - preparation
Check the maximum input voltage (V DC) of the
1
device you wish to connect. For this see the user
manual that came with the device.
Make sure the device does not consume more current
2
(mA) than 450 mA.
3 Check what connector tip is required for your device.
See the compatibility sheet for the proper tip for your
device.
Charging 5V devices (fig. B)
1 Insert the plug of the USB cable into the USB port (3).
2 Connect the connector tip to the USB cable.
Insert the connector tip into the power supply jack of
3
the device.
> PHILIPS lights up when a device is charging.
> PHILIPS will flash when the device is fully charged.
4 Disconnect the device from the USB adapter.
12:39 Pagina 4
6

Technical specifications

• Rated input: 110V - 240V AC (60/50Hz)
• Rated output: 5.6V DC, max. 450 mA
• Operating temperature: 0ºC - 45ºC
• Size: 70.3 x 55.5 x 35.5 mm (h x w x d)
• Weight: 70 g
7 Troubleshooting
Problem
– Possible cause
• Solution
USB adapter does not charge connected device
– Voltage of device does not correspond with that of USB
adapter.
• Refer to the user manual that came with the device.
– Improper connection between device and USB adapter.
• Make sure that the USB cable is properly inserted into
the device and the USB adapter.
– Damaged USB cable or connector tip.
• Replace USB cable and/or connector tip.
– Wrong connector tip used.
• Check connector tip and replace if necessary.
– Non supplied USB cable / connector tip used.
• Replace with supplied USB cable/connector tip.
– Problems with electrical circuit of USB adapter.
• Take the USB adapter to your local distributor.
4