GE AKL08 Manual Del Propietario E Instrucciones De Instalación página 17

12
Install the Air Conditioner in the Case
Slide the air conditioner into the case. Do not
A
push on the controls or the finned coils.
Make sure the air conditioner is firmly seated.
Reinstall the locking brackets and screws
B
removed earlier.
IMPORTANT! Reconnect the ground wire to
C
the air conditioner.
If your model has the control connectors,
D
reconnect them to the front grille by pressing
them together until the locking tabs snap
into place.
Attach the front grille frame to the case by
E
inserting the tabs on the grille frame into
the slots on the front top of the case. Push
the grille frame in until it snaps into place
around the power cord on the right side.
Secure the front grille frame to the case by
F
replacing the screws removed earlier.
Ground wire
Install the filter. Hook the inlet grille in the
Screw
G
frame and close it. Connect power.
Guide the levers carefully
through the grille frame
as you push it in.
17