Aux Function - Panacom BL-1353HS Manual Del Usuario

AUX FUNCTION

You can use the 3.5mm cabled included in the kit to play music
once your Bluetooth is turned off or once the battery of the
device is out of power. Connect one end of the 3.5 mm aux cable
into the Aux jack of the headset. The other end of the cable con-
nects to the 3.5 mm jack of your mobile phone / computer / audio
devices.
(Note: Bluetooth mode should be turned of while using the AUX
feature. Don't connect Bluetooth between your headset and your
mobile phone when Aux is being used)
MOBILE DEVICES SUPPORTED
In theory, it can support all equipments with Bluetooth®-enabled
phone or music device that supports Advanced Audio Distribution
Profile (A2DP) and Audio Video Remote Control Profile (AVRCP).
In order for Bluetooth® devices to communicate with one
another properly, they must utilize the same Bluetooth® profile.
To determine the profiles supported by your device, please refer
to the device's user guide. Certain Bluetooth features including
those listed may not be supported by all compatible Bluetooth®-
enabled devices, and/or the functionality of such features may be
limited in certain devices.
Pg. 10