Connections To Be Made - Axxess AX-LCD 2000-up Instrucciones De Instalación

The DIN harness with leads is only
for the following vehicles. For these
applications, the AX-LCD allows the
retention of the vehicles personaliza-
tion menu that is lost after removing
the factory radio.
For all other applications that require the AX-LCD screen, connect the DIN cable from the LCD screen
into the DIN connector on the interface. Skip the following steps for these applications.
For the toyota Camry 2012-2014, rav-4 2013-up,
tundra 2014-up, and Venza 2013-up
The following connections are to be made to the factory
28-pin connector behind the radio:
• Pink of the AX-LCD to pin-9
• Blue/Pink of the AX-LCD to pin-10t
For the Mazda 6 2014-up
The following connections are to be made to the
factory 24-pin connector behind the radio:
• Pink of the AX-LCD to pin-1L
• Blue/Pink of the AX-LCD to pin-1J

Connections to be made

• Fiat 500L 2014-up
• Mazda6 2014-up
• Ram 1500/2500/3500 (without 8.4"
touchscreen radio) 2013-up
• Ram Chassis Cab 3500/4500/5500
(without 8.4" touchscreen radio) 2013-up
(this is the pin view of the factory harness)
(this is the wire view of the factory harness)
AX-LCD
• Ram Promaster 2014-up
• Ram Promaster City 2015-up
• Toyota Camry 2012-2014
• Toyota Rav-4 2013-up
• Toyota Tundra 2014-up
• Toyota Venza 2013-up
3
For the Fiat 500L 2014-up,
ram 1500/2500/3500,
Chassis Cab 3500/4500/5500 (without 8.4"
touchscreen radio) 2013-up,
Promaster 2014-up,
Promaster City 2015-up
The following connections are to be made to the
factory 52-pin connector behind the radio:
31 40
10
1
(this is the pin view of the factory harness)
• Blue/Pink of the AX-LCD to pin-12
• Pink of the AX-LCD to pin-2
49
52
44
41