Battery And Fuse Replacement - CAMBRIDGE EM830 Serie Manual Del Usuario

Battery and Fuse Replacement

Warning: To avoid false readings, which could lead to
possible electric shock or personal injury, replace the
battery as soon as the low battery indicator " " appears.
To prevent damage or personal injury, use only replace-
ment fuses specified.
Before opening the back cover or the case, turn off the
meter and remove the test leads.
" "
If the symbol appears on the display, it indicates
that the battery must be replaced immediately. If the error
of reading is too large, it also indicates that the battery
must be replaced immediately.
To replace the battery, remove the screws on the back
cover and remove the back cover, replace the exhausted
battery with a new one of the same type (9V battery, 6F22
or equivalent). Reinstall the back cover and the screws.
To replace fuse, remove the screws on the back cover and
remove the back cover, replace the blown fuse with a new one
of the same ratings. Reinstall the back cover and its screws.
This meter uses two fuses:
F 1: 250mA/300V Fast fuse, Min. Interrupt Rating 1500A,
Ø5X20mm
F 2: 10A/300V Fast fuse, Ø5X20mm
(Note: 10A/300V FAST fuse can only be replaced at
specified service station)
Warning: Remove all test leads from the meter before
opening the back cover or the case.
ACCESSORIES
Manual: 1 piece, Test Lead: 1 pair
NOTE:
1. This manual is subject to change without notice.
2. Cambridge™ will not take responsibilities for any loss.
3. The contents of this manual can not be used as a
reason to use the meter for any special application.
14