Publicidad
Idiomas disponibles
Idiomas disponibles
Wirsbo CoSy Timer Module, Art. No. 80462, for Transformer Unit 230/24V Art. No. 80460
UK
Wirsbo CoSy Radio Timer Module, Art. No. 80444, for Base Unit Art. No . 80462 (24V)
and 80446 (230V)
1. Function
The timer is a digital 2-channel 7-day programmer, which can be used
together with room thermostats for time-controlled temperature set-back.
Actual time is shown on the digital display and the set-back times dis-
played as dark segments
around the display. Each segment represents
30 minutes. Up to 4 set-back periods per day and per channel can be
programmed. If no button is pressed for 60 seconds during programming
the time switch goes back to the start position. All programmed settings
are retained in the event of a power failure.
Wirsbo CoSy Timer Module for
Transformer Unit
Channel 1 controls temperature set-
back for room thermostats connected
to terminal 5 in the upper half of the
transformer unit (1 – 6) and channel 2
those connected to terminal 5 in the
lower half of the transformer unit
(7 - 12). (See fig.)
Wirsbo CoSy Radio Timer Module for Base Unit
Channel1 controls temperature set-back for room thermostats connected
to outputs 1, 3, 5 and 7 . Channel 2 controls temperature set-back for room
thermostats connected to outputs 2, 4, 6 and 8.
Menu
Summer/winter
Real time, switching time
SET TIME CHECK... ON
Clr = Clear switching times
PROG DATE NEW...OFF
Copy = copy switching times
SU/Wi
24
Actual day of the week
or program day
18
1234567
Segment display of the
existing program
12
1 segment = 30 minutes
Button Menu
activates the menu or
MENU
breaks off the process
Button moves the flash
Button minus and plus
changes the values
2. Reset
RESET 1 Time and date is deleted, Switching
program remains pres together
24
RESET 2 Switching program deleted
18
6
Press all 5 buttons together.
1234567
First release button
12
other buttons.
1 2
4
Day/month/year
D/M/Y
Symbol for automatic operation
Symbol for manual override
6
Symbol for continuous override ON
Symbol for continuous override OFF
1 2
State of contact
ON (set back mode)
OFF (comfort mode)
OK
Actual selected channel display
Button OK
confirms the input
MENU
, then let release all
MENU
3. Setting actual time
Button
SET TIME
Select SET TIME... with
and confirm with
Confirm SET TIME...once more with
Set actual hour with
and confirm with
Set actual minute with
24
with
OK
18
6
1234567
12
1 2
4. Setting actual date and summer/winter changeover
SET
Press
MENU
DATE
D/M/Y
Select SET TIME... with
and confirm with
Select DATE... with
and confirm with
Set year with
and confirm with
SET
DATE
D/M/Y
Set day and month with
and confirm with
Summer- /winter changeover can be made
SET
DATE
manually or automatically if set.
SU/Wi
Choose the region of summer-/winter (see table
below)
with button
Choice
Beginning of
summertime
Last Sunday
Euro
In March
Last Sunday
GB
In March
US
First Sunday
in April
nonE
No changeover
MAn
If manual changeover is required choose MAn during the date input. Auto-
matic changeover depends on your country/area.
Choose the appropriate setting for your country/area.
Freely programmable date with regard to the change from summer
to winter time
Southern Hemisphere
On the Southern Hemisphere the date at which the summer time starts/
ends must be programmed for the same year
activates the menu.
MENU
OK
OK
OK
and confirm
.
OK
OK
OK
.
OK
with
buttons
Confirm
.
OK
End of
Country/
Summertime
Area
Last Sunday
EU
in October
Fourth Sunday
GB
In October
Last Sunday
Only North
in October
America
No changeover
.
Publicidad
