Klarstein 10031221 Manual De Instrucciones página 9

4. Press the button [TIME/TEMP], display shown default value: temp 280 °C, time no va-
lue. Press START, the device will turn to working mode without any time limited. If you
need set time, you can press in default mode. Time flash and show 99 mins, then press
[+/-] to adjust the time value, the time will recycling shown from 1-99 min. After set
done, press [START] to enter into working mode.
5. If time is required to reset during working status, press [TIME/TEMP] until time lamp
flashes, then press [+/-] to set time. There is no need to press start button again, due
to the time is set up in working mode. Just wait for the time number flashes for 3 times,
then the device will enter into working mode automatically with new setup time.
6. The rotary tray is defaulted in rotation mode, press [TURN] once, the tray will stop ro-
tating. Press [TURN] again, the tray will return to rotation mode.
7. Press [STOP] to shut down in the end of countdown or after using. By this time, the de-
vice will enter into power-saving standby mode, lamp goes out, synchronous motor stop
rotating, but the cooling fan still keep working for 5mins. Do power off until the device
cools down. In one case there is no need to power off if this product is frequently used
for cooking.
8. During cooking, press down the lid lock(shown as
figure 3) if you need pause cooking and add some
food or sauce, then the lid is in unlock mode, the
user can move the lid to left or right side. When
the lid is moved to left for right side, the device will
stop working. After straightening the lid, the device
will go on cooking. ATTENTION: To avoid accident
caused due to the lid movement during moving,
please make sure the lid is locked (to lift the lid
lock) when you need move the whole device.
9. Make sure the oil drain has mix in the product base. To avoid after cooking's oil overflow,
Shall be after cooking's oil not over the oil max.
9