Accessory Parts And Parts To Be Procured Locally; Precautions For Safety - Toshiba RBM-PMV0361E Manual De Instalación

Accessory parts and Parts to be procured locally

Accessory parts
Part name
Installation Manual
Connection cable and
Connector conversion cable
(Connected to PMV Kit)
Heat insulating pipe
Binding band L
Binding band M
Binding band S
Attached joint and seal pipe
1

PRECAUTIONS FOR SAFETY

• Ensure that all Local, National and International regulations are satisfied.
• Read this "PRECAUTIONS FOR SAFETY" carefully before Installation.
• The precautions described below include the important items regarding safety. Observe them without fail.
• After the installation work, perform a trial operation to check for any problem.
Follow the Owner's Manual to explain how to use and maintain the unit to the customer.
• Turn off the main power supply switch (or breaker) before the unit maintenance.
• Ask the customer to keep the Installation Manual together with the Owner's Manual.
CAUTION
• THIS PMV KIT ADOPTS THE NEW HFC REFRIGERANT (R410A) WHICH DOES NOT DESTROY
OZONE LAYER.
The characteristics of R410A refrigerant are ; easy to absorb water, oxidizing membrane or oil, and its pressure
is approx. 1.6 times higher than that of refrigerant R22. Accompanied with the new refrigerant, refrigerating oil
has also been changed. Therefore, during installation work, be sure that water, dust, former refrigerant, or
refrigerating oil does not enter the refrigerating cycle.
To prevent charging an incorrect refrigerant and refrigerating oil, the sizes of connecting sections of charging
port of the main unit and installation tools are charged from those for the conventional refrigerant.
Accordingly the exclusive tools are required for the new refrigerant (R410A).
For connecting pipes, use new and clean piping designed for R410A, and please care so that water or dust does
not enter. Moreover, do not use the existing piping because there are problems with pressure-resistance force
and impurity in it.
Q'ty RBM-
PMV0361E PMV0901E
1
1
2
2
4
1
0
New Refrigerant Air Conditioner Installation
Shape
1
UPPER
OUTDOOR INDOOR
1
UNIT SIDE UNIT SIDE
2
2
4
1
2
1
Usage
Connecting cable for PMV control
For heat insulating of liquid pipe
connection section
For fixing of PMV Kit
For fixing of heat insulating pipe
For bundling of wires
For connection of Ø9.5 refrigerant
pipes