Buttons And Functions - EAS ELECTRIC EAS51 Manual De Instrucciones

Buttons and Functions

Before you begin using your new air conditioner, make sure to familiarize yourself with its
remote control. The following is a brief introduction to the remote control itself. For instructions
on how to operate your air conditioner, refer to the How to Use Basic Functions section of this
manual.
1
3
5
7
SHORT CUT
9
I SENSE
11
Model: EAS51
TEMP
1
Min. temperature is 17°C.
TEMP
2
Max. temperature is 30°C.
3
ON/OFF: Turns the unit on or off.
FAN SPEED: Selects fan speeds in the following order:
4
AUTO  LOW  MED  HIGH
MODE: Scrolls through operation modes as follows:
5
AUTO  COOL  DRY  HEAT  FAN
2
NOTE: Please do not select HEAT mode if the
machine you purchased is cooling only type. Heat
4
mode is not supported by the cooling only appliance.
6 TIMER ON: Sets timer to turn unit on (see How to
6
Use Basic Functions for instructions).
8
10
SWING:
7
movement. Hold down for 2 seconds to initiate
12
vertical louver auto swing feature(some units) .
8 SLEEP: Saves energy during sleeping hours .
SHORT CUT: Sets and activates your favorite presettings.
9
TIMER OFF: Sets timer to turn unit off (see How to
10
Use Basic Functions for instructions).
I SENSE: Temperature sensing and room temperature
11
display button.
LED DISPLAY:
12
off the display on the indoor unit.
NOTE:
for 5 seconds to lock the keyboard. Press together
the two buttons for 2 seconds to unlock the keyboard.
04

: Decreases temperate in 1°C increments.
 Increases temperate in 1°C increments.
:
Starts and stops the horizontal louver
Press this button to turn on and turn
Press together the two buttons simultaneously
Press together simultaneously
V.2