Salicru CS141 Manual Rápido página 8

EN
CS141 SNMP / WEB / MODBUS MANAGER
Slot
Version
3
2
6
7
Description
1 COM1 Port
2 COM2 Port
3 LAN Port RJ 45
4 DC Input
5 AUX
6 Status LEDs
(red / green)
7 Slide Switch
DIP Switch
8 USB
External
Version
3
5
CS141SC
Function
Serial Interface to connect an UPS or another device with a original RS232 cable
To connect additional devices for example (GSM Modem, temperature and humidity sensor,
SENSORMANAGER_II, Fieldbus devices (MODBUS RS232, Profibus, LONBus, etc.).
Available at CS141L, CS141SC, CS141MINI & CS141R_2 = RS232
Available at CS141LM & CS141SCM =RS485
(not equipped CS141BL, CS141BSC)
Ethernet 10/100 Mbit Interface with integrated status LEDs
(green LED: Connection to network established, yellow LED: network traffic)
external device: supplied by a 12V switching adapter (delivered with the device)
internal device: supplied via the slot interface of the device
Equipped at CS141L, CS141LM, CS141SC and CS141SCM to connect CON_R_AUX4
and BACS etc.
Operation Status CS141
Unpacking the operating system (update procedure)
Error while unpacking the operating system
Boot process of the operating system
Communication to external device lost (e. g. UPS)
Normal operation - connection to external device established
For switching between different boot options
.
Slide Switch in the middle position
CS141 in the configuration mode and activated the default IP address
10.10.10.10. after a cold start.
Slide Switch in the right position
DHCP Mode, the IP is set by the DHCP Server. Check the MAC address
of your device to identify your device in the network.
Slide Switch in the left position
The network settings of the HTTP interface are used it is also possible
to configure DHCP Mode.
8
2
6
7
5
CS141L
/ 1 + 2 position
/ 1 position OFF + 2 position
/ 1 position ON + 2 position
1
4
3
6
2
CS141MINI
LED Notification
red blinking
red fast blinking
red long on
red and green
green blinking
OFF: To set the
ON:
OFF:
7
Version: 2019-01-16