Beyerdynamic TG 500 Instrucciones Breves página 17

TG 500 – Operation
5.3 Belt pack transmitter TG 500B
Top
Bottom
4 pin Mini-XLR connector (male) for connection of
microphones or instruments
LED displaying audio peak
On/Off button
LED indicating operation
Antenna (permanently mounted)
Charging contacts
• Hold the battery compartment cover
• Flip the battery compartment cover
• Insert two AA batteries of the same type (NiMH HR 6 or Alkaline LR 6) and follow the symbols inside the battery
compartment .
• Flip the battery compartment cover
• The current battery status is indicated on the transmitter's
synchronisation the correct type of battery has been selected on the receiver.
• Connect a microphone or the WA-CGI instrument cable to the 4 pin Mini XLR plug
• Switch on the pocket transmitter using the On/Off switch
tery status are displayed. The LED of the power indicator
teries are full. If the LED of the power indicator
empty.
• Additional information (frequency, HF power) can be displayed by pressing the On/Off button
• To switch the transmitter off, hold the On/Off button
LCD
Three-level sensitivity switch (Gain)
0dB / +12dB / +24dB
Battery compartment cover
Battery compartment
Infrared interface for synchronisation
Belt clip
at its lateral indentations on the left and right of its upper end.
open downwards.
shut upwards. Magnet latches hold it closed securely.
and receiver's displays. Please ensure that prior to
until the name entered at the receiver and the bat-
is illuminated green if the batteries/rechargeable bat-
is illuminated red, the batteries/rechargeable batteries are
pressed until the message "Off" is displayed.
7
.
briefly repeatedly.