Changing The Battery In The Remote Control; Warranty; Disposal - Glatz Pz200 Instrucciones De Montaje Y Uso

Maintenance and care
• In most cases, defective parasols can be repaired by your GLATZ part-
ner. Only use original spare parts provided by GLATZ.
• Every once in a while, wipe the remote control with a damp, non-abra-
sive cloth. The remote control may not be immersed in liquids.

Changing the battery in the remote control

• Always keep batteries out of the reach of children. If a battery is swal-
lowed, a doctor should be consulted immediately.
• Incorrect usage creates a risk of explosion.
• Always wrap batteries during storage or disposal to avoid discharge,
ignition or damage.
• Always dispose of batteries properly in accordance with applicable
laws.
1
2
CR 2430
3
Open cover
!
Ensure screw is not lost and unlock
cover carefully.
Replace battery
!
Use battery type CR 2430 and ensure
correct polarity!
Close cover
!
Re-insert screw carefully and tighten.
24 25

Warranty

Always contact your GLATZ partner first before sending in the product.
The warranty period amounts to 24 months from the date of purchase.
The warranty shall become null and void in the following cases:
• Due to external force
• Incorrect use and maintenance
• Damage due to force majeure
EC Conformity declaration
We, Glatz AG, Neuhofstrasse 12, CH-8500 Frauenfeld, SWITZERLAND,
hereby declare that this product complies with the directives of the European
Community. The applicable declarations of conformity can be found on our
Download area at www.glatz.com.

Disposal

This symbol on the product, the accessory parts or on the
packaging indicates that the product must not be treated as
unsorted municipal waste, but must be disposed of separate-
ly. Dispose of the product at a designated collection point for
recycling. The disposal of electrical and electronic equipment
within the EU and in other European countries takes place through
collection points that have separate collection systems for electrical and
electronic equipment.
By properly disposing of the product, you are helping to prevent potential
environmental and health hazards that can be caused by improper
handling of old equipment. The recycling of materials contributes towards
the conservation of natural resources. Therefore, do not dispose of old
electrical and electronic equipment via the unsorted municipal waste.
The packaging is made from environmentally friendly materials that can
be disposed of in your local recycling facilities. By properly disposing of
the packaging and packaging waste you are helping to prevent potential
environmental and health hazards. The product consists of metal and
synthetic parts. Disposal at the end of the product's service life must be
performed in accordance with the regional environmental and waste
regulations.