Klein Tools Lok Serie Instrucciones Para El Uso Y Cuidado Apropiados página 10

Cinturones de cuerpo y las correas de posicionamiento para reparador de líneas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Lineman's Equipment Warning Tags
Klein permanently attaches highly durable warning
and instruction tags to its lineman's body belts and
positioning straps.
If any of these tags become unattached, lost, or
damaged, call Klein Tools, toll-free at 1-800-553-4676,
for information on how to have the tags replaced
free of charge.
Tags for Lineman's Body Belts
For Positioning Use Only
C1b1.
■ Use this product for positioning only, nOt for fall arrest.
997
■ If possible, the use of fall arrest equipment is highly
read
recommended in addition to this belt.
Other
■ Assume the responsibility for determining that your belt is in
side
good condition at all times.
■ Do nOt use connecting devices made of leather
or manila rope.
■ never use side D-rings for fall arrest.
■ Positioning anchorages must support your
weight plus any additional job related load.
■ never allow belt to come in contact with edged or
pointed tools; or come near a radiator, steam pipe, stove,
heater, engine exhaust pipe or other heat source.
■ For use by properly trained professionals only.
■ Only use locking snap hooks.
■ OPe equipment must only be used for the
specific purpose for which it is designed and
intended.
■ OPE equipment must be destroyed if subjected
B1-2 1
to impact loading.
007
■ Always visually check that all buckles are properly
closed before each use.
read
Other
■ never allow a positioning strap to become twisted
side
before engaging D-ring.
■ Always visually check that: 1) each snap hook
freely engages D-ring or anchor point, 2) keeper is
completely closed with each use. never rely solely
on the feel or sound of a snap hook engaging.
■ Before each use check that: 1) fabric or belt strap
is free of burns, cuts, broken stitches or excessive
wear, 2) rivets are not bent, loose or missing, 3) buckles and
D-rings are not distorted or cracked, 4) if tongue buckle,
tongue does not bind on buckle and buckle holes are not
damaged. 5) remove from service, destroy and discard
belt or harness if it fails inspection and replace
immediately.
10
arrest protection when working at any elevated
position. Therefore, independent fall-arrest equipment
should be used in addition to Klein's body belts
and positioning straps unless a competent person,
as defined by OSHA, has determined that such
fall-arrest equipment is not necessary or appropriate.
B1-2 2.
007
read
Other
side
read
next
tag
read
next
tag
Klein strongly recommends using fall-
■ For personal use only. nOt for towing or hoisting.
■ Snap hooks attached to D-rings must have
less than 3/4" (19mm) throat opening. never attach
ladder or rebar hooks onto D-rings.
■ never attach multiple snap hooks onto a D-ring.
■ never punch additional holes in or alter any belt or
harness in any way.
■ never work without independent fall arrest protection if
there is danger of a fall.
■ nOt for recreational or sporting use.
■ employer— instruct employee as to proper use and
warnings before use of equipment.
■ read, understand and follow all instructions and
cautions attached to and/or packed with this and
all occupational protective equipment before each use.
■ Klein strongly recommends that Klein components
NOT be interchanged with other components made by
other manufacturers, because Klein cannot guarantee that
other manufacturers' components are free of defects in
materials or workmanship.
read
next
tag

Publicidad

Tabla de contenido
loading

Tabla de contenido