Step 5:
1. Remove the Inside rose,inside liner and trim
INSIDE LEVER
LEVER CATCH TOOL
Insert tip of the lever removing tool into the hole on the
•
bottom of lever.
Push down on the lever catch pin and slide off inside lever,
•
rose, rose liner and mounting plate.
Remove the rose liner by turning it clockwise and aligning the
•
the bump on the rose to the recess on the rose liner.
8
INSIDE ROSE LINER
INSIDE MOUNTING PLATE
INSIDE ROSE
Insert the key into the cylinder
•
and turn 45 degree and hold.
Push down on the lever catch
•
pin and slide off outside lever
and rose.
OUTSIDE LEVER ASSEMBLY