Brother MPRINT MW-145BT Guía De Referencia Rápida página 8

Charging LED (Orange)
With the charging LED, the status of the power sup-
ply can be checked.
The charging LED has two functions.
(1) Checking the charging status
(when the AC adapter is connected)
LED status
Constantly lit
Off
Flashing
(2) Checking the battery level
(while running off the lithium ion battery)
LED status
Off
Flashes once
Flashes twice
Continues to flash 3 times
• Please try to discharge the battery completely before recharg-
ing it, to increase battery lifetime.
• If the charging LED flashes while the printer is printing, imme-
diately connect the AC adapter and charge the battery. The
printer may stop printing.
• Due to the characteristics of batteries, even though the battery
is fully charged, using them in locations at low temperatures
greatly reduces the number of prints possible.
• In order to maintain the efficiency and life of the rechargeable
battery, remove the AC adapter from the printer when charging
is completed.
• In order to maintain the efficiency and life of the rechargeable
battery, do not place or use the printer in direct sunlight, near
heaters or other hot appliances, in any location exposed to
extremely high temperatures (e.g. on the dashboard or in the
back of your car).
Printer status
Charging
Finished charging
Malfunctioning battery
Battery level
More than 60% charged
Less than 60% charged
Less than 30% charged
Almost empty
1-7