Blumfeldt 10030007 Manual De Instrucciones página 27

jets have been worked for 15 minutes and stopped, bubbling can be stopped but
not be started. The re-starting of jets should wait for 10 minutes. When the jets
have been on for 20 minutes and stopped, the function cannot be started again
within 10 minutes.
HEATER Key – On-off key for the heating system. Press this key the heating system
will start working and the red indicator lamp will be on. Press again and the heating
system will stop working and the lamp will be off. When pressing down the key
'HEATER', the heating system will start working and the red indicator lamp will be
on. At the same time, the red indicator lamp of the key FILTER will also be on and
the filter pump will start working, too. This is a normal phenomenon required by
the design. When the preset temperature has been reached, the heating system
will stop working while the heating indicator lamp will not turn off. The filter pump
will stop working and the filtration indicator lamp will be off. When the water
temperature falls to 2 below the preset temperature, the heating system will start
working automatically and so will the filter pump. The filtration indicator lamp will
be on.
TEMPERATURE Key – Key for setting temperature. Press this key and the numbers
on the display screen will start flashing, and the keys for increasing or decreasing
temperatures can be pressed to set the temperature. When settings are finished,
press the TEMPERATURE Key again to confirm. Default temperature is 40°C, and
temperature can be set in the range of 20-42°C.
Key for increasing temperature
Key for decreasing temperature
27