EN
Operating the robot
Pause
To pause the robot, press the AUTO button on the robot or CLEAN
on the remote control.
NOTE: The robot automatically switches to stand-by after around 10 minutes. It can
be switched back on at any time by pressing the AUTO or CLEAN buttons. Press the
button a second time to reactivate its cycle.
Stop
When the robot finishes its cleaning cycle, it goes back to home
base. To manually stop the robot, press the AUTO button on the
robot or CLEAN on the remote control.
Switch off
Turn the switch on the side of the robot to "O". The robot is switched
off.
17