Cleaning; Specifications - Panasonic VL-WD812EX Guia De Informacion

Indicator display
Lit green
Lit orange
Signal status
Lit red
(during standby)
Flashing red
R Depending on how [Indicator lamp] is configured, the indicator may always be off or only be lit when transmitting
(when monitoring or talking) with the main monitor. (See the [Indicator lamp] setting in the Operating
Instructions of the Video Intercom System.)

Cleaning

In order to prevent incorrect sensor detections, disconnect the power from the camera when cleaning the camera.
Wipe the camera with a soft cloth.
R When the camera is excessively dirty, wipe it with a slightly damp cloth.
Important:
R Do not directly spray the camera with water from a hose or other objects.
(There is a risk of fire or electric shock if water enters inside the camera.)
R Do not use any cleaning products that contain strong or weak detergents, alcohol, polish powder, powder
soap, benzine, thinner, wax, petroleum, or boiling water. Also do not spray the product with insecticide,
glass cleaner, or hair spray. This may cause a change in colour or quality of the camera.

Specifications

Power source
Power consumption
Dimensions (mm) (height ´
width ´ depth)
Mass (weight)
Installation method
Operating environment
Transmitting range
Frequency range
Image sensor
Minimum illuminance required
Focal length
Angular field of view (camera
angle)
Sensor detection method
Sensor detection range
Lighting method
8
Strong
Weak
Transmissions cannot be sent because there is no signal (out of range).
Power supply unit (VL-PS240)
24 V DC, 0.4 A
During standby: approx. 1.5 W
During operation: approx. 4.5 W (when the LED lights are not lit), approx.
8 W (when the LED lights are lit)
Approx. 160´118´290 (when the camera is front facing and including the
wall mount bracket)
Approx. 960 g
Wall mount (wall mount bracket supplied)
Ambient temperature: approx. -20 °C to +50 °C
Relative humidity (non-condensing): up to 90 %
Approx. 100 m (line-of-sight distance from the main monitor)
1.88 GHz to 1.90 GHz
0.3 M pixel CMOS
*1
1 lx
Fixed (0.4 m - infinity)
Horizontal: approx. 53°, vertical: approx. 41°
Pyroelectric infrared sensor (heat sensor) and motion detection
R Heat sensor (when the surrounding temperature is approx. 20 °C)
Horizontal: approx. 63°, vertical: approx. 20°, detection range: approx.
5 m
R Motion detection sensor
Horizontal: approx. 53°, vertical: approx. 41°
*2
2 white LED lights
Camera's status
Indicates the signal status from the main
monitor.
R We recommend installing the camera in
an area where the status indicator is
strong (when the indicator is lit green).