Weighing Function; Saving Personal Data - Punktal PK-DS46 Manual De Operación

Balanza body fat
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WEIGHING FUNCTION

• Place the scale on a hard, flat surface(avoid carpets). An uneven
floor contributes to inaccurate measurements.
• Stand on the scales with both feet. The device switches on auto-
matically.
• Distribute your weight equally and wait for the scale to determine
your weight.
• The digits on the display will flash before your exact weight will be
shown.
• In order to extend the battery life, the device will automatically
turn off 10 seconds after you have stepped off the scale.

SAVING PERSONAL DATA

NOTE
• The scale has default values that you can change, as described
below.
• Carry out the following steps in sequence and within a few se-
conds. Otherwise,the device will automatically cancel input mode.
• Press the button SET. The memory space will flash on the display
(USER0). Confirm the setting by pressing SET or select another me-
mory space by pressing the UP/DOWN button. Then press SET to go
to the next setting.
• The symbol for"male" or "female" will flash. Confirm the setting by
pressing SET or use the UP/DOWN button to choose the symbol for
your gender. Then press to go the next setting.
• The height setting will flash. Select your height by pressing UP or
DOWN button. Holding down one of the buttons will accelerate the
process. Confirm your entry by pressing SET.
• The setting AGE will flash. Select your age by pressing UP or DOWN
button. Holding down one of the buttons will accelerate the process.
confirm your entry by pressing SET.
• The device can only function correctly if you stand on the device
with bare, dry feet.
• If necessary wipe the contact surface improve results.
• Due to the significant fluctuation of body fat, it is different to
attain a standard value. On average the optimal testing time is bet-
ween 6 p.m. And 8 p.m, since the body fat remains very consistent
during this period of time.
• Press the SET button. The preset stored position date appears
on the display (USER flash). Use the UP/DOWN button to select the
stored position at which your date is saved.
18.

Publicidad

Tabla de contenido
loading

Tabla de contenido