Romus 93266 Manual De Instrucciones página 2

Double electrode probe for depth measurement 31 cm / Accessory
The probe is mostly used for measurements in polystyrene and other insulation
materials.
Needle Length: 310 mm
Isolation: 35 mm lang
Weight: approximately 150 gr.
The probe used for measurement of wood shavings, isolating materials
Accessory for VI-D4
Operating Instruction:
Pinelectrode with Miniature 3,5mm Jack-plug and 70cm cable. Connect cable into the
destine docket at the measurement device.
Press the electrodes into the soft material.
Read out the measured value of the measurement device.
Measuring range depends of the model and make of the measuring device.
93266 – SONDE SOUS FACADE
INSTRUCTION MANUAL EN Mode d'emploi
ITE