Publicidad
Idiomas disponibles
Idiomas disponibles
C-
Fall Arrest Harness
EN 361:2002
Tested by Notified Body
TÜV SÜD Product Service GmbH (No 0123) Daimlerstraße 11
85748 Garching - Germany
T: + 49/89/361965-483 W: www.tuev-sued.de
D-
Harness Anchorage Points (Minimum Breaking Strength - Figure-1)
E-
Size Selection
E-1-
Leg
E-2-
Height
E-3-
Product Weight
F-
Product Label
F-1-
Manufacturer
F-2-
Product Name
F-3-
Production Year
F-4-
Serial Number
F-5-
Tested Notified Body
F-6-
Before Use Read User Guide
F-7-
Standard
F-8-
Product Code
G-
Fall Clearance (Figure - 2)
H-
Using Harness Buckles
H.1-
Harness Buckles STB-45
H.2-
Connect the buckles together
H.3-
Pull the webbing to adjust
1. Caution
Personal Protective Equipment (PPE)
1.1-
Working at height is one of dangerous activities that can lead to serious
injuries and death. It is under the responsibility of the user to learn and
apply it in practice of an appropriate techniques and safety methods.In this
e r
a g
d r
, s
h t
s i
u f
l l
o b
y d
h
a
n r
s e
s s
h s
or under the supervision of such personnel. Improper use can cause serious
injury and fatal accidents.
1.2-
There must be a rescue plan that is to be applied in case of emergency
which may occur during working at height.
1.3-
This safety harness is a component of a fall arrest system and is aimed
to prevent user from falling. This enhancement itself is not suitable for
working at height, it must also be used together with CE certificated Lanyards
EN 354, shock absorbers EN 355, hooks EN 362 and fall arresters EN 360.
2. Raw Material
This safety harness is made of;
Textile Materials: % 100 Polyester
Metal Parts: 304 or 316 Stainless Steel
Accessories: Polyester, Polyamide and PVC
3. General Specification
This Full body harness enables user to work safely by making a connection
to a secure point with an appropriate tool. This safety harness is manufactured
in comply with standards of EN 361 specified in the directive 89/686/EEC
4.Product Use
4.1 EN 361:2002 Fall Arrest Harness
* Full Body Fall Arrest Harness
When full body fall arrest harness is used as fall arrester , all components of
t
e h
s
s y
e t
m
h s
u o
d l
o c
m
p
y l
w
h t i
t
e h
Remaining equipmtents which are anchoring points of harness must comply with
EN 795, Lanyards must comply with EN 354, Shock absorbers must comply with
EN 355 , Carabiner must comply with EN 362.
* Back Ring; (Figure- 1)
Use only back D rings of safety harness with other equipments described in EN
363 (Shock absorber, lanyard, fall arrest systems). These points were marked
with "A" in order to be recognized easily.
4.2 Fall Clearance Distance
Fall Clearance (Calculation of fall clearance distance Figure- 2)
Clearance distance should be calcutlated in working area for a possible fall. In
case of fall from height, user should be able to adjust the clearence distance in
order not to hit any object or ground.
Fall Clearance
Fall clearance is the height at which a worker must attach to an anchorage to
avoid contact with a lower level. In order to calculate required fall clearance
distance the following measurements must be kept in mind.
o
u
d l
e b
s u
d e
y b
o
n
y l
a
t
a r
n i
d e
p
r e
e r
u q
e r i
m
n e
s t
f o
E
N
3
3 6
F (
l u
a l
r r
s e
s t
A : Length of Fall Arrest System (Lanyard)
B : Length of the Shoch Absorber after a fall
C : Height of Suspended Worker
D : Safety Factor
5
Product Control and Validation
5.1
Before Each Use
Working at height equipment must be used as personalized. These products
must be controled on regular basis before and after each use and findings
must be recorded into product control form. Apply following controls on
an adequately lighted environment by lying the product down on a flat
surface;
• Webbings should be checked for cuts, abrasions, color change, broken
stitches and undue stretching.
• Buckles should be checked for signs of wear, cracks, deformation, corrosion
or other damages. They should function correctly and smoothly.
• D Rings and other metal parts should be checked for signs of wear,
cracks, deformation, corrosion or other damage.
• Connectors should be checked for sign of wear, cracks, deformation, corrosion,
dirt. The gate and the locking mechanisms should work properly. The gate
should open and close completely.
• Labels should be secure and legible.
During the controls if at least one of these deviation is found, usage of the
equipment should be suspended or retired and must be immediately sent
back to producer for detailed inspection. No repair is allowed by unauthorised
person. Only manufacturer directions should be applied.
5.2 During Each Use
When use product with a system , make sure that all pieces of equipment in
the system are correctly positioned and compatible with each other.
6. Supplementary Information Regarding Standard; EN 365
6.1 Rescue Plan
A worker who has been incapacitated by an injury or medical condition and
who is suspended by the full body harness must be rescued immediately.
So you must always have a rescue plan for such emergency situations. For
this adequately trained personnel and rescue equipment must be present.
6.2 Anchor Point
o s
n
n
l e
The anchor point of the system comprises this product should preferably
be located above the user or should at least at the waist level of the user.
An attachment point below this level will cause a serious injury or death.
The anchor point must conform to the requirements of the EN 795 standard
and the minimum strength of it must be 12 kN.
7. Kaya General Information
7.1 Life Span
Although the potential lifespan is 10 years from the date of production, it is
very difficult to define the exact service life as it varies according to the fre-
quency and intense of use, environmental conditions, correct maintenance
and storage. Recommended life expectancy of this Fall Arrest Harness is 5
years from date of first use.
If the product has one of the deviations below it should be withdrawn from
service immediately and should be destroyed to prevent further usage.
• It has suffered a heavy shock load or has had a load dropped onto it.
• There are discoloration, stiffness, cuts and tears, glazed or fused areas
on the webbing.
• There are cracks, deformation, corrosion or excessive wear on the metal
parts.
• It fails to pass inspection (before usage or detailed inspection).
• Labels (markings) are illegible or absent.
• It is extremely dirty and does not respond to normal washing.
• It has come into contact with chemicals and especially acids or is even
suspected.
• Its history is unknown.
• Its lifespan stated in the user's manual has expired or even it has never
s y
e t
m
. )
been used.
• There is a slightest doubt that the product is no more safe and reliable.
7.2 Storage
Product is sold with storage bag and user guide. Additionally model and
applied standards are provided with the product. During the storage keep
the product in it's own bag. Storage area of the product should meet the
following requirements;
- Dry, away from direct sun light, room temperature.
- Do not store together with acids, solvents etc.
- Keep away from direct heat sources.
- If the product gets humid during the storage, dry the product in room
temperature before usage.
7.3 Maintenance
Personal protection equipment should be checked regularly to make sure
that the equipment will operate properly whenever it is used Harness can
be wiped with a wet sponge, for cleaning.
Publicidad
