Bigben RRVP Instrucciones De Funcionamiento página 15

Setup
Power Source
This unit is designed to operate on a normal 100 -240V ~ 50/60Hz household power source. Do not
attempt to operate the system using other power sources. This may result in damage to the unit and
could render your warranty void.
Connect the AC power Jack (6) on the power cable to the unit and the USB jack to the AC adaptor.
Plug the cable into the power socket and switch on.
Remote Control
a. Remove the battery cover from the back of the remote control
b. Insert a CR2025 (3V) battery (included) making sure that the + and - symbols on the battery match
those on the battery compartment.
c. Replace the battery cover.
Using the remote control.
a. To use the remote control, point it at the IR sensor (2) on the unit and press the button gently but
firmly. Since the remote control range is reduced when the unit is used at an angle, try to aim it
directly at the remote sensor.
b. Do not expose the remote sensor to strong light (direct sunlight or artificial light) and make sure that
there are no obstacles between the remote IR sensor and the remote control
Most functions must be operated by remote control. Please take care of the remote control.
1. Press
on the remote control to switch it on, the unit automatically switches on to radio mode.
Press again to turn the unit off and switch to the clock mode (standby mode)
2. Dimmer - LED Display
Press (12) to control the brightness of the lights for the LED display There are 3 levels: High-
level (brightness)
3. Lamp Light
The user can select their favourite light from among 7 colours. Press Power On
Choose the colour buttons
Press (13). The colours will automatically change in sequence.
Press again to turn off the light.
4. Sound On/Off (2 nature sounds)
Press Power On
select the music you want to play. There are 2 music options to choose from (SD1 or SD2).
Press Volume
Press to turn off the function
5. Setting the clock
• Press and switch to standby mode (clock mode).
• Clock displays 24-hour format only. Press Clock Set
• Press HR (16) to set the hour, then press Clock set (14) to confirm the hour
• Press Min (18) to set the minute. Then press Clock set (14) to confirm the minute.
6. Setting the alarm
• Press and go to standby mode (clock mode).
• Press and hold
• Press again. The unit will switch to Sound Output mode:
Press HR (16) or Min (18) to select the sound output:" Buzz sound, SD1, SD2, or FM (radio)
to confirm and the unit will switch to Time mode
Press
• Press Hour (16) to set the hour and
Mid-level (Dim light)
. The lamp will function in the selected colour.
and Sound (2) to switch to sound mode. Press
+ / - (8, 9) to increase or decrease the volume when the sound is playing.
Alarm1 (5) for 3 seconds, The sign AL 1 will show on the LED display
OFF
(14). The display will flash.
to confirm the Hour
- FR 5 -
and .
Skip – / Skip + to