Cisco Linksys NMH300 Manual De Usuario página 17

9.
The Welcome screen appears . To
begin installation, click Start Setup .
10.
If you have a hard disk drive
available, select I have a Hard
Drive and am ready to install it .
Click Next .
If you do not have a hard disk drive
available, click Back to return to the
Welcome screen . After you obtain a
3 .5-inch, Serial-ATA (SATA) hard disk
drive, run the Setup Wizard again .
11.
You can use a new or previously
used hard disk drive . If you use a
previously used hard disk drive, all
data on that drive will be erased
during installation . If you want to
keep any of the data, back up the
drive before you continue with the
Setup Wizard .
Click Next .
12.
The following steps will describe
how to install the hard disk drive .
Click Next .
Media Hub
13