Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
30" GAS SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
NOTE:
1. Do not pinch the power supply cord or the
flexible gas conduit between the range and
the wall.
2. Do not seal the range to the side cabinets.
3. 24" (61 cm) minimum clearance between
the cooktop and the bottom of the
cabinet when the bottom of wood or
metal cabinet is protected by not less than
¼" (0.64 cm) flame retardant millboard
covered with not less than No. 28 MSG
sheet metal, 0.015"(0.4 mm) stainless
steel, 0.024"(0.6 mm) aluminum, or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance when
the cabinet is unprotected.
4. For cutouts below 22 7/8"(58.1 cm),
appliance will slightly show out of the
cabinet.
5. Allow at least 19 ¼" (48.9 cm) clearance
for door depth when it is open.
*** IMPORTANT:
than 30 1/16" (76,4 cm), make sure the appliance is centered in the counter opening
while pushing into it. Raise leveling legs at a higher position than the cabinet height
(see page 3), insert the appliance in the counter and then level.
is supported by the leveling legs and NOT by the cooktop itself.
IMPORTANT:
Cabinet and countertop width
should match the cutout width.
A. HEIGHT
B. WIDTH
(Under Cooktop)
35 7/8" (91,1 cm)
30" (76,2 cm)
36 5/8" (93 cm)
To avoid cooktop breakage for cutout width (E dimension) of more
E
E
C. COOKTOP
D. TOTAL DEPTH TO
WIDTH
FRONT OF RANGE
31 1/2"
28 5/16" (71,9 cm)
(80 cm)
21¾"
(55.25 cm)
Door Open
B
FRONT OF
CABINET
E. CUTOUT WIDTH***
(Countertop
and cabinet)
30±1/16"
21 3/4" (55,2 cm) Min.
(76,2±0,15 cm)
22 1/8" (56,2 cm) Max
24" (61 cm) Min. with
2
D
C
A
Side Panel
Make sure the unit
22 7/8"(58.1 cm) min.
23 1/4"(59.05 cm) max.
(see Note 4)
1 1/8"
(2.86 cm)
F
Ref.
F. CUTOUT
G. HEIGHT
DEPTH
OF COUNTERTOP
35 7/8" (91,1 cm) Min.
36 5/8" (93 cm) Max.
backguard
Publicidad
Tabla de contenido
