Further Information - Axis 262+ Guia De Instalacion

Page 12
Resetting to the Factory Default Settings
This will reset all parameters, including the IP address, to the Factory Default settings and
format the hard disk drive:
1. Press the Factory Setup button on the rear of the unit for 20 seconds while the unit is
powered up.
2. When the Status indicator on the front panel displays steady green, which can take up to
3 minutes, the AXIS 262+ has been reset to the factory default settings.
3. Re-assign the IP address, using one of the methods described in this document.
It is also possible to reset parameters to the original factory default settings via the Web
interface. For more information, see the online help or the user's manual.
Important!
Resetting the AXIS 262+ to the factory default settings will also erase all recorded
video. If you have recorded video you wish to save, download it from the download
tab on the Main View page, before resetting the unit.

Further information

The user's manual is available from the Axis Web site at www.axis.com or from the Axis
Network Video Product CD supplied with this product.
Tip!
Visit www.axis.com/techsup to check if there is updated firmware available for your
AXIS 262+. To see the currently installed firmware version, see the Basic
Configuration Web page in the product's setup tools.
AXIS 262+ Installation Guide