Publicidad
2.5
2.5
2.5
Jumpers Setup
Jumpers Setup
Jumpers Setup
2.5
2.5
Jumpers Setup
Jumpers Setup
The illustration shows how jumpers are
setup. When the jumper cap is placed on
pins, the jumper is "Short". If no jumper cap
is placed on pins, the jumper is "Open". The
illustration shows a 3-pin jumper whose pin1
and pin2 are "Short" when jumper cap is
placed on these 2 pins.
Jumper
PS2_USB_PW1
(see p.2, No. 1)
Note: To select +5VSB, it requires 2 Amp and higher standby current provided by
power supply.
USB_LAN1
(see p.2, No. 37)
Note: To select +5VSB, it requires 2 Amp and higher standby current provided by
power supply.
USB_PW2
(see p.2, No. 24)
Note: To select +5VSB, it requires 2 Amp and higher standby current provided by
power supply.
USB_PW3
(see p.2, No. 26)
Note: To select +5VSB, it requires 2 Amp and higher standby current provided by
power supply.
USB_PW4
(see p.2, No. 28)
Note: To select +5VSB, it requires 2 Amp and higher standby current provided by
power supply.
ASRock
Short
Setting
Short pin2, pin3 to enable
+5VSB (standby) for PS/2 or
USB23 wake up events.
Short pin2, pin3 to enable
+5VSB (standby) for LAN or
USB01/45 wake up events.
Short pin2, pin3 to enable
+5VSB (standby) for
USB6_7 wake up events.
Short pin2, pin3 to enable
+5VSB (standby) for
USB8_9 wake up events.
Short pin2, pin3 to enable
+5VSB (standby) for
USB10_11 wake up events.
870iCafe
Motherboard
Open
1 5
1 5
1 5
1 5
1 5
Publicidad
