Publicidad
Idiomas disponibles
Idiomas disponibles
Timi n g arm
Timi n g disarm
Timi n g stay arm
NC/NO alarm for wired zones
Alarmi n g through cellular net work
Temperature alarm (℃)
Someone at home remi n der
4.3.8 Setup home stay arm zones
Note: All new added sensors are i n home stay arm zone, the followi n g steps can cancel home stay arm zone.
1.
Enter into sensor management interface; cli c k the i c on of home stay arm.
2.
In pop up wi n dow, switch to OFF status and confi r m.
3.
After setup, the sensors are not in status of home stay. It wi l l not be tri g gered to alarm when the panel in
home stay mode.
4.3.9 Modify Zone Name
1.
Enter into sensor management interface, choose the zone.
2.
In pop up wi n dow, i n put new name, for example, "Front Door Alarm".
3.
Modi f i e d successfully.
4.3.10 Check Sensors' Status
0~254s/keep alerti n g. Default i s 90s.
Three group of ti m i n g arm can be setup.
Three group of ti m i n g di s arm can be setup.
Three group of ti m i n g stay arm (home stay) can
be setup.
The alarm mode for wi r ed zones: NC or NO,
default i s NC.
GSM Alarm functi o n could be chosen from
Closed/Open/Auto Change.
Temperature alarm can be set from Closed or
0℃~120℃,default alarm i s 85℃.
Could set somebody at home remi n der, the
default i s closed for thi s functi o n.
Publicidad
