Urmet 1039/50 Manual Del Usario página 5

INSTALLATION
Refer to the instructions contained in the system manual for wiring, maximum distances and configuration
operations.
The housing may be used both in DIN bar mounting and wall mounting by means of screws and spacers;
please take care of mounting it in dry and repaired environments.
Use Urmet 1039/101 RJ45 connector for BUS OUT and 1039/100 connector for LAN.
Insert the wires in the guide respecting the colour coding shown (Standard T568B).
WIRING INSTRUCTIONS WITH 1039/90 WIRE
For LAN connection fit the black wire 1039/90 in a RJ45 plug with Urmet logo (1039/100).
• Remove the black insulating sheath by pulling the two sheath breaking threads to facilitate accommodation
of the wire in the flush-mounting box.
• Insert the wire in the guide respecting the colour coding shown (Standard T568B).
Black sheath
Grey sheath
• Cut the wires which protrude from the guide by approximately 5mm, insert the guide in the plug and
crimp the plug with a specific tool.
§
Make sure that the grey sheath remains inside the plug.
§
This type of connection DOES NOT ensure double insulation.
DS1039-006C
Wire
No.
1 White-Orange
2 Orange
1
3 White-Green
4 Blue
8
~ 5 mm
1
8
Wire colour
1
8
Wire Wire colour
No.
5 White-Blue
6 Green
7 White-Brown
8 Brown
Plug
5