Basic Connection - NextBase Cinema Pro Guia De Inicio Rapido

5 Connect the player with the AV/Power cable
(one end of the car power cable) as shown in
the following illustration.
6 Slide the mount slot of the player into the
backplate of the stanchion mount fully until it
clicks into place.
7 Adjust the player to the desired viewing angle.
Note
To remove the player from the stanchion mount, pull and hold the
release latch upwards and then slide the player off to disengage
the connection.

Basic Connection

For proper connection method,
refer to the illustration.
12V/5A
5V/2.4A
12V/5A
5V/2.4A
Cigarette Charger