Frequently Asked Questions - Corsair GRAPHITE 780T SERIE Guia De Instalacion

GRAPHITE SERIES

Frequently Asked Questions

1. How do I remove the I/O Panel ?
A. First, remove the front fascia by pushing in the three tabs from inside the fascia,
then push towards the front of the case.
B. Next, unscrew the 2 screws at each side of the panel.
2. Does the polarity matter with the I/O panel's power and reset header?
No, only the LED headers.
3. Who should I contact if I received my case damaged or one of the fans is no
longer working?
Please go to corsair.force.com and request an RMA so that we can replace the
damaged part(s).
4. Where can I mount a fan?
Fan Mount Locations
Front
Top
Rear
Bottom
Side
Mid
9
780T
®
3 x 120 mm or 2 x 140 mm
3 x 120 mm or 2 x 140 mm
1 x 120 mm or 1 x 140 mm
2 x 120 mm
X
X
5. How do I remove the front panel?
To remove the front panel, push the top corners of the plastic cover.
6. How do I remove the bottom dust filter(s)?
To remove the bottom dust filter, first locate the pull out tab underneath the PSU,
then pull the bottom dust filter out.
7. How do I remove the Drive Cage?
Locate and remove the two screws securing the cage to the base on the bottom
of the case then pull the drive cage out. Drive cages are stackable and can be
installed on top of each other, or completely removed for improved cooling.
Note: Note: The HDD cage can also be
removed by removing the four screws
located directly under the base on the
bottom of the case.
To learn more about this case visit the product page at corsair.com
10