Aleratec 1:1 HDD Copy Cruiser Mini USB3.0 Guia De Inicio Rapido página 6

Using the HDD Copy Cruiser Mini
Using as a USB HDD Docking Station
1. Use the included power adapter and cord to plug the HDD Copy Cruiser Mini into
a power outlet.
2. Connect the USB Type-A connector or to your computer's USB Port.
Note: The USB 3.0 Type-A connector is also compatible with USB 2.0 ports.
3. Connect the USB Type-B connector to the USB Port located on the back of the
HDD Copy Cruiser Mini.
4. Insert 1 or 2 SATA Hard Disk Drives into the drive slots on the top of the HDD
Copy Cruiser Mini. When inserting, align the SATA port on the Hard Drive with the
SATA connector in the drive bay slot.
5. Power on the HDD Copy Cruiser Mini.
Note: Any unformatted Hard Disk Drive will not show up as a drive in the Windows
Operating System. You must format these drives using the operating system's tools.
4 www.aleratec.com
®