Night-Light; In Case Of Problems - babyruf MBF 7010 Manual De Instrucciones

Night-light

The transmitter unit is equipped with an integrated night-light [18].
Night light
[9]
If you deactivate the Night light , the Temp Alert function is also deactivated.

In case of problems

1. The transmitter unit does not transmit any signals.
The sensitivity of the noise activation is set to too low a level. Increase the sensitivity in the corres­
ponding menu.
The batteries are weak or the power adapter plug is not connected properly. Connect the transmitter
unit with the power adapter plug to a properly installed power socket.
2. The transmitter unit transmits sounds continuously.
The sensitivity of the noise/motion activation is set to too high a level. Lower the sensitivity in the
corresponding menu.
3. The batteries in the receiver unit are discharged after a short time.
Transmission of sounds is activated continuously. Adapt the settings to save the batteries.
The batteries are defective/damaged. Contact your sales outlet for new batteries.
4. Short range.
There are too many walls or other electrical appliances between the receiver and transmitter units.
Move the location of the receiver and transmitter units.
The batteries in the transmitter unit are weak or the power adapter plug is not connected properly.
Connect the transmitter unit with the power adapter plug to a properly installed power socket.
Maintenance
Clean the surface of the housing with a soft, fluff-free cloth.
Do not use any cleaning agents or solvents.
On?
G
19