Setting The Contrast; Exiting Basic Settings - Sigma BC 1909 HR Manual Del Usuario

6 tHE BASIC SEttINGS

6.12 SEttING tHE CoNtRASt

1909
1
n n
k Change the display to CONTRAST using the MODE 1 button.
1
k Press the SET button briefly. Display flashes.
2
k Set the value using the MODE 2 button (+) or the RESET button (-).
3
(1 = weak/3 = strong).
k Confirm by pressing the SET button.
4
SET OK appears on the display.

6.13 EXItING BASIC SEttINGS

k Press the SET button down for 3 seconds in order to stop
entering settings (SETTINGS CLOSE flashes).
- +
1909 1909
2 3
1909
4
n
BC 1909 HR
1909
n 3 sec.
39