Fault Diagnosis - Tornado Marathon 350 98132 Manual De Operaciones Y Mantenimiento

Fault Diagnosis

Problem
The spray pump and vacuum
does not work
No spray or the spray is not
even
The vacuum power fails
*If the fuse blows several times, the machine should be checked by an authorized Service Agent.
Reason
• Power failure
• Spray nozzle is blocked
• Solution tank is empty
• Solution feed filter
blockage
• The recovery tank may
be full
Remedy
• Check the main fuse*, the power
supply cord and the plug
• Check the spray pipe and nozzle
• Is there water in the tank? If there is
water in the tank, wait for a couple
of seconds for the pump to build up
pressure
• If the tank is empty, fill it as indicated
• The filter in the clean water tank, the
pipe or the nozzle may be blocked.
Switch off the unit and perform
maintenance.
• Empty recovery tank.
10