Using The Interior Heater - Mobitronic MHI1100 Instrucciones De Uso

MHI1100
6

Using the interior heater

➤ Open the bracket on the bottom of the device.
➤ Place the mobitronic interior heater at a suitable location in the vehicle
interior (e.g. the front passenger footwell, see fig. 2, page 2).
A
NOTICE! Fire hazard!
The interior heater may not be placed on the dashboard or seats.
The device must be aligned in such a way that there is sufficient
free space (see fig. 2, page 2).
I
NOTE
To heat up the vehicle interior as quickly as possible, the interior
heater must be positioned as low as possible in the vehicle. The
warm air that comes from the blower should be set in such a way
that it is not directed at the seat or any obstacles. If this happens,
the outgoing warm air is reflected and sucked back into the device
before the car's passenger area can be heated. That results in a
reduced or even completely absent heating effect.
➤ Connect the device to a 230 Vw socket using the connection cable.
➤ Use the switch (see fig. 3 1, page 3) to select the desired heating level:
Switch
Heating capacity
position
0 The device is switched off.
1 The output is 550 W (measured at –20 ºC).
2 The maximum output of 1100 W is established
(measured at –20 ºC).
The maximum output at 0 °C is 1000 W.
EN
Using the interior heater
15