Factory Preset Timings; Troubleshooting - Insignia IS-LM100761 Guia Del Usuario

IS-LM100761_combo.fm Page 9 Tuesday, April 19, 2005 8:51 AM
IS-LM100761 15-inch Monitor

Factory Preset Timings

Mode Resolution
VESA 720 × 400
VESA 648 × 480
MAC 640 × 480
VESA 640 × 480
VESA 800 × 600
VESA 800 × 600

Troubleshooting

Problem
The monitor does not display.
The Power LED is not on.
The image is not stable.
The image is not centered, is
too small, or is too large.
The picture bounces or a wave
pattern is present in the
picture.
The picture is blurry.
The picture is showing the
wrong or irregular colors.
Freq (Hz) Mode
70 VESA
60 VESA
67 MAC
75 VESA
56 VESA
60 VESA
Solution
1
Verify that the monitor and computer are turned
on.
2
Verify that the VGA cable is correctly connected
to the computer.
3
Verify that the VGA connector pins are not bent.
4
Verify that the computer is not in a power-saving
mode.
1
Verify that the monitor is turned on.
2
Verify that the power cord is correctly connected
to an AC power outlet.
• Verify that the VGA cable is securely connected
to your computer.
• Adjust the horizontal and vertical size and center
to get the correct image.
1
Keep any devices that may cause electrical
interference away from your monitor.
2
See the FCC information at the back of the
manual.
• Adjust the contrast and brightness.
• If any colors are missing, verify that the VGA
connector pins are not bent.
www.insignia-products.com
Resolution Freq (Hz)
800 × 600 72
800 × 600 75
832 × 624 75
1024 × 768 60
1024 × 768 70
1024 × 768 75
9