Publicidad
Step 18
To make adjustments to the drawers, loosen the fi rst SCREW in the
å
SLIDES a 1/4 turn, then turn the CAM clockwise or counter-clockwise.
Notice how the drawer raises or lowers as you turn the CAM. The higher
the screw in the oblong hole, the higher your drawer front will be. The
lower the screw, the lower the drawer front. By adjusting the drawers
this way, it will help the DRAWER FRONTS line up better when closed.
Tighten the SCREW when fi nished with adjustments.
NOTE: Please read the back pages of the instruction booklet for
å
important safety information.
This completes assembly. Clean with your favorite furniture polish or a
å
damp cloth. Wipe dry.
And to celebrate, why not share your success story?
Loosen this screw a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw.
The higher the screw in the oblong hole, the
higher your drawer front will be. The lower
the screw, the lower the drawer front.
Page 22
Cam
416403
www.sauder.com/services
Publicidad
