English - Zyxel Prestige 630 Serie Guia De Inicio Rapido

Installing Your Modem
This chapter introduces the ports and LED indicators; and shows you how to install your modem and
software driver.
Needed Information
Fill in the table below with information from your Internet Service Provider (ISP) and telephone
company before installation. You may not need to fill in every blank.
Ask your ISP for the following information:
Driver: RFC 1483, PPPoA or PPPoE.
RFC 1483 Mode: Bridged or Routed (only when using RFC 1483).
VPI: The Virtual Path Identifier number identifies a bundle of
virtual channels.
VCI: The Virtual Channel Identifier number identifies a logical connection
between end stations.
Setup Type: LLC or VCMUX.
User Name: Lets your ISP know which account you are logging into.
Password: Protects your account from unauthorized use.
Installation Procedure
Have your system operating disk handy during the installation, in case a specific file can not be found
on your computer.
The back panel has two interfaces: a USB and an ADSL
port as shown in the following figure.
Step 1. Close all Windows programs and applications.
Step 2. Plug the square end of the USB cable into the
back of your modem (see figures), and then
plug the rectangular end of the USB cable into
the back of your computer.
Do not use a Windows hardware installation wizard
to install your modem. ZyXEL has a custom installa-
tion procedure. If your computer starts a Windows
hardware installation wizard (probable), click
Cancel at the first screen.
E n g l i s h
Fill in the blanks
Plug this cable end Plug this cable end
into your modem into your computer
Click Cancel
1