Grohe F-DIGITAL 36 291 Manual De Instrucciones página 6

Function F2 - Setting mode (adaption to the local conditions), see f old-out page IV, Figs. [21] and [22].
Button Description
Start the function menu
- Select the function by simultaneously pressing and holding the - / + buttons.
- F2 Function select by turning the ring
• Start F2 - Setting mode
=> Confirm by simultaneously pressing the - / + buttons.
Changing the point of discharge by turning the ring (not for 36 294)
=> Confirm by simultaneously pressing the - / + buttons.
- Turn ring and set minimum flow rate.
Confirm the setting by simultaneously pressing the - / + buttons.
=>
- Turn ring and set maximum flow rate.
Confirm the setting by simultaneously pressing the - / + buttons.
=>
- Turn ring, measure water outlet temperature and set at 100 °F.
=> Confirm the setting 100 °F by simultaneously pressing the - / + buttons.
Abort the function menu by pressing and holding Start/Stopp button or
after 3 minutes without triggering.
Function F3 - Register/de-register additional (max. 3) digital controller/diverter (not for 36 294), see fold-out page IV, Fig. [21].
Button Description
Start the function menu
- Select the function by simultaneously pressing and holding the - / + buttons.
- F3 Function select by turning the ring
• Start F3 - Register additional digital controller/diverter
=> Confirm by simultaneously pressing the - / + buttons.
- Press the buttons 1 + 3 of the additional digital controller/diverter simultaneously in
order to register it.
- Pressing the - / + buttons simultaneously on the pending digital controller saves the
selection and exits the menu.
• Start F3 - De-register additional digital controller/diverter
=> Confirm by simultaneously pressing the - / + buttons.
- Pressing the - / + buttons simultaneously on the factory digital controller to de-
register all additional controllers/diverters.
Abort the function menu by pressing and holding Start/Stopp button or
after 3 minutes without triggering.
Function F4 - Factory reset, see fold-out page IV, Fig. [21].
Button Description
Start the function menu
- Select the function by simultaneously pressing and holding the - / + buttons.
- F4 Function select by turning the ring
• Start F4 - Factory reset
=> Confirm by simultaneously pressing the - / + buttons.
- Press + button of digital controller.
- Press - button of digital controller.
- Press Start/Stop button of digital controller.
=> Confirm by simultaneously pressing the - / + buttons.
False entry => abort menu.
Abort the function menu by pressing and holding Start/Stopp button or
after 3 minutes without triggering.
Function F5 - Activate continuous operation, see fold-out page IV, Fig. [21].
Button Description
Start the function menu
- Select the function by simultaneously pressing and holding the - / + buttons.
- F5 Function select by turning the ring
• Start F5 - Activate continuous operation
=> Confirm by simultaneously pressing the - / + buttons.
- Press Start/Stop button of digital controller.
- Press - button of digital controller.
- Press + button of digital controller.
=> Pressing the - / + buttons simultaneously starts the continuous operation.
False entry => abort menu.
Caution: Risk of scalding. All points of discharge opened, do not stay in the
wet area.
Abort of the function after 15 minutes (after that cold water runs for a minute) or
prematurely by operating the digital controller/diverter as well as a the transceiver
(no cold water running).
Please pass these instructions on to the end user of the fitting.
3
The right to make technical modifications is reserved.
English
Visualization
Illuminated ring flashes 1x red.
Illuminated ring flashes 2x red.
Illuminated ring flashes green 1x and water flow starts.
Point of discharge changes.
Illuminated ring flashes green 1x.
Illuminated ring flashes green 1x.
Illuminated ring flashes green 3x.
Illuminated ring flashes violet 1x.
Visualization
Illuminated ring flashes red 1x.
Illuminated ring flashes red 3x.
Illuminated ring flashes green 1x.
Illuminated ring flashes green 1x.
Illuminated ring flashes green 3x.
Illuminated ring flashes green 1x.
Illuminated ring flashes green 3x.
Illuminated ring flashes violet 1x.
Visualization
Illuminated ring flashes red 1x.
Illuminated ring flashes red 4x.
Illuminated ring flashes green 1x.
Segment of illuminated ring flashes blue 1x.
Segment of illuminated ring flashes blue 1x.
Segment of illuminated ring flashes blue 1x.
Illuminated ring flashes green 3x.
Illuminated ring flashes violet 3x.
Illuminated ring flashes violet 1x.
Visualization
Illuminated ring flashes red 1x.
Illuminated ring flashes red 5x.
Illuminated ring flashes green 1x.
Segment of illuminated ring flashes blue 1x.
Segment of illuminated ring flashes blue 1x.
Segment of illuminated ring flashes blue 1x.
Illuminated ring flashes cyan 3x.
Illuminated ring flashes violet 3x.
Illuminated ring flashes cyan 3x.