SEttIng thE PC
Setting up Your PC Software (Based on Windows xP)
the Windows display-settings for a typical computer are shown below. the actual screens on your
PC may be different depending upon your particular version of Windows and your particular video
card. Even if your actual screens look different, the same, basic set-up information will apply in
almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
the resolutions in the table are recommended. (all resolutions between the supported limits are
supported)
Mode
resolution
Vga
The interlace mode is not supported.
➣
The set might operate abnormally if a non-standard video format is selected.
➣
. First, click on "Control Panel" on the Windows start menu.
. When the control panel window appears, click on "Appearance
and Themes" and a display dialog-box will appear.
3. When the control panel window appears, click on "Display" and
a display dialog-box will appear.
. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution):
optimum: 640 X 480
If a vertical-frequency option exists on your display settings
dialog box, the correct value is "60" or "60 Hz". Otherwise,
just click "OK" and exit the dialog box.
horizontal
Frequency (khz)
720X400
31.469
640X480
31.469
English - 9
Vertical
Pixel Clock
Frequency (hz)
Frequency (Mhz)
70.087
28.322
59.940
25.175
Sync Polarity
(h/V)
- / +
- / -