Klarstein CoolZone 250 Manual Del Usuario página 23

Unscrew top hinge pin from the hinge. Then turn the hinge over and screw hinge pin.
5
Re-fit middle hinge to left side. Ensure
bottom door is aligned horizontally
and vertically, so that the seals are
closed on all sides before finally
tightening the middle hinge.
6
7
Re-fit upper door and then upper
hinge on left side. Ensure upper
door is aligned horizontally and
vertically, so that the seals are closed
on all sides before finally tightening
the upper hinge. If necessary, a
spanner to tighten the hinge.
EN
23