Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
8.Ordering Information
ESM-3710-N
(77x35 DIN Sizes)
A
Supply Voltage
2
24V
3
24V
4
115V
5
230V
10 - 30 V Z
8
BC
Input Type
J ,Fe CuNi IEC584.1(ITS90)
05
K ,NiCr Ni IEC584.1(ITS90)
10
PT 100, IEC751(ITS90)
11
PT 100, IEC751(ITS90
09
PT 1000, IEC751(ITS90)
14
PT 1000, IEC751(ITS90
13
PTC (Not-1)
12
NTC (Not-1)
18
Compressor Output
E
1
Relay Output (16(8) A@250 V
2
SSR Driver
Temp. Sensor which is given with ESM-3710-N
V
0
None
1 PTC-M6L40.K1.5 (PTC Air Probe 1.5 mt Silicon Cable)
PTCS-M6L30.K1.5.1/8" (PTC Liquid Probe 1.5 mt Silicon Cable)
2
NTC-M5L20.K1.5 (NTC Sensor, thermoplastic moulded with 1.5 m cable
3
NTC-M6L50.K1.5
4
Customer
9
All order information of ESM-3710-N Temperature Controller are given on the table at above. User
may form appropriate device configuration from information and codes that at the table and convert it to
the ordering codes.Firstly, supply voltage then other specifications must be determined. Please fill the
order code blanks according to your needs.
Please contact us, if your needs are out of the standards.
Note-1:If input type is selected PTC or NTC (BC= 12, 18), Temperature sensor is given with the
device.For this reason, if input type is selected as PTC,sensor type (V = 0,1 or 2) or if input type is
selected as NTC, sensor type (V = 0,3 or 4) must be declared in ordering information.
A BC D E
W
( %15) 50/60Hz - 1.5VA
±
V ±
( %15) 50/60Hz - 1.5VA
V ±
( %15) 50/60Hz - 1.5VA
V ±
( %15) 50/60Hz - 1.5VA
V
Output (
Maximum 20m, Maximum 17V
for cooling application)
(NTC Sensor, stainless steel housing with 1.5 m cable
for cooling application)
/
FG HI /
U V W Z
0
/
00 00
/
1
Scale(°C)
0°C/32°F ; 800°C/1472°F
0°C/32°F ; 999°C/1830°F
-50°C/-58°F ;
-19.9°C/-4°F ;
99.9°C/212°F
-50°C/-58°F ;
-19.9°C/-4°F ;
99.9°C/212°F
-50°C/-58°F ;
-50°C/-58°F ;
,at resistive Load, 1 NO )
Z
)
0
0
400°C/752°F
400°C/752°F
150°C/302°F
100°C/212°F
14
Publicidad
Tabla de contenido
