Operation
1.
Turn off the Zenius5 and place it on a stable surface, with the back side
facing up.
2.
Lift the latch handle of the cover and turn it counterclockwise to the
vertical unlock position and remove the cover of the battery compart-
ment.
3.
To insert the battery to the compartment, attach the bottom side of the
battery to the compartment at an angle and then lower the upper side
to engage the connector.
4.
Reattach the compartment cover by inserting it bottom first. Fit the
latch handle into place. Secure the latch by turning it clockwise to the
horizontal lock position.
The IP rating is only ensured if the battery compartment is
attached correctly.
5.
Attach the AC Adapter to the Zenius5 and to a mains socket to start
charging.
Only use the charger delivered with the Zenius5.
When using the Zenius5 for the first time, wait until the battery
is fully charged. The initial charging takes approximately
6 hours.
Zenius5 | 16
en