BaByliss PRO dB2000 Manual página 6

ENGLISH
IONIC HARD HAT DRYER
BAB900E
Ionic technology
This BaBylissPRO® hard hat dryer
has a ionic generator. It propels
negative ions uniformly onto the
hair. Hair is naturally charged with
positive ions, and blow-drying the
hair increases this positive charge,
thereby generating static electri-
city. The hair thus appears more
lifeless.
Negative ions propelled by the
hood dryer neutralize every posi-
tive charge and thus eliminate flya-
way hair. The hair is then smoother,
shinier and more manageable.
It has also been proved that ionic
technology enhances the action of
hair products.
GENERAL INSTRUCTIONS
The BaBylissPRO® hard hat dryer
is protected in its pack and stable
once erected, but care should be
taken during assembly.
DIRECTIONS FOR ASSEMBLY
1. Insert each wheel leg into center
base using guides, and snap into
place.
2. Insert lower end of tube assemb-
ly into hole of center wheel base.
3. Turn wheel base over and tighten
bolt to secure tube assembly.
4. Stand assembled base upright
and loosen collar adjuster.
5. Pull upper & middle tubes, loca-
ted inside tube assembly, up to
desired height and firmly tighten
collar adjusters to secure.
6. Place bonnet socket onto stand
bushing at top of upper tube.
7. Use the two upper clips and
the two lower clips provided to
attach the power cord to upper
and lower tube sections.
FEATURES
1. 2 SPEED SETTINGS: 0 (OFF),
I (LOW), II (HIGH); 3 TEMPERA-
TURE SETTINGS:
I (WARM), II (HOT).
2. AUTOMATIC SHUTOFF: the unit
shuts off when the visor is lifted
NOTE: visor must be down to turn
the unit on.
3. ADJUSTABLE DIFFUSER: loca-
ted inside bonnet; can be used
to vary the airflow to the head.
4. EASY CLEANING: removable
intake grille.
5. IONIC TECHNOLOGY BUTTON
WITH INDICATOR: located on
the side of the bonnet to allow
dispersion of ions to the hair.
6. LOCK-IN CASTERS: two of the
five casters lock to keep unit se-
curely in place.
AUDIO
The dB2000 hard hat dryer is
equipped with a speaker for audio
playback with included lineout
cord. One end of the cord plugs
into the AUX port on the inside
of the bonnet (near speed setting
switch) and the other end plugs
into a smartphone, MP3 player or
6
(COLD),