Matco Tools MT2871R Instrucciones De Operación

HERRAMIENTA DE CORTE REVERSIBLE 3"
3 OUTIL À TRONÇONNER RÉVERSIBLE 3 PO
"
REVERSIBLE
CUT OFF TOOL
Max. Free Speed ................................... 20,000 RPM
Cut Off Wheel ..........................................................3"
Air Inlet ........................................................ 1/4" NPT
Horse Power .......................................................... 0.7
Min. Air Hose Size .......................................... 3/8" ID
Average Air Consumption .............................. 4 CFM
WARNING
RATED RPM OF THE ACCESSORY
RPM RPM RPM
USED MUST EXCEED THE
MAXIMUM TOOL RPM SHOWN
ALWAYS READ INSTRUCTIONS
BEFORE USING POWER TOOLS
ALWAYS WEAR SAFETY
GOGGLES
ALWAYS WEAR FACE
PROTECTION
ALWAYS WEAR HEARING
PROTECTION
AVOID PROLONGED EXPOSURE
TO VIBRATION
S P E C I F I C A T I O N S
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to filter out microscopic particles.
Recommended Air Pressure ........................ 90 psig
Sound Level ....................................................90 dBA
Vibration Level ...........................................1.6 m/sec²
Length ...................................................................... 9"
Net Weight ..................................................... 1.9 lbs.
WARNING
Copyright © Professional Tool Products, 2017
MT2871R
• Operating Instructions
• Warning Information
• Parts Breakdown
MT2871R
All rights reserved