Installation Preparation; Hardware Installation - Conceptronic C54PSERVUM Manual De Usuario

ENGLISH

5.1 Hardware installation

Before you can start the configuration and use of the C54PSERVUM, you need to connect the
C54PSERVUM to your printer and network.
Note:
To use the C54PSERVUM wireless, you need to configure it first. To configure the
C54PSERVUM for your wireless network, you need to connect it wired (with RJ45
network cable) to your network first.
A.
Connect USB cable of your printer to the USB port of the C54PSERVUM.
B. Connect the supplied network cable to the C54PSERVUM and to your network (router,
switch, etc.) or computer.
C. Connect the supplied power supply to the C54PSERVUM and to a free power socket.
When the hardware installation is complete, you can proceed to Chapter 5.2 for the
software installation.

5. Installation preparation

18