Hisense HBM17 Serie Manual De Uso Y Cuidado página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

mains. Ensure that the plug is removed
from the mains socket..
Tools you will need(Not provided):
Philips Screwdriver &
Slotted Screwdriver
Note:
When required, tilt the refrigerator back in
order to gain access to the base, you
should rest the appliance on soft foam
packaging or similar material to avoid
damaging
the
backboard
refrigerator. To reverse the door, the
following
steps
recommended.
1. Stand the refrigerator upright. Open the
upper door to take out all door racks (to
avoid racks damaged) and then close the
door.
2. With the door closed, remove the upper
hinge cover (A) (you can pry it up with
slotted screwdriver) on the top right side of
appliance and remove 3 special flange
screws (B) with Socket Wrench. Keep the
upper hinge cover for future reference.
8
Socket
Wrench(8mm)
of
the
are
generally
Hisense Refrigerator
3. Remove the upper hinge (Please hold
upper door by hand when installing). Keep
it for future reference.
4. Use your both hands to open the door
more than 90°. Lift it up and take it off.
5. Loosen screw (B) on the bottom of the
fridge door and take down stop block (A),
then install stop block (A) to the left side
with screw (B).
6. Open the freezer door, then loosen 2

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido