Charging An Electric Vehicle - Leviton Level 2 Manual De Instrucciones

CHARGING AN ELECTRIC VEHICLE

STEP 1
Connect the AC power plug to a 240V/30A
dedicated electrical outlet. When connected
correctly, the Power indicator LED will
illuminate green, indicating the EVSE
Charging Station is ready for charging.
STEP 2
NOTE: The vehicle must be
parked close enough to the
EVSE Charging Station to allow
the charge connector to connect
to the vehicle charge port without
putting any stress on the charge
connector cord. Position the
charge connector cord so that it
will not be stepped on, tripped
over or otherwise subjected
to damage or stress. Plug the
charge connector of the EVSE
Charging Station into the charge
port on the vehicle (see vehicle
owner's manual for location
of charge port). Charging starts
automatically when a proper
connection is made.
STEP 3
To stop charging, disconnect
the charge connector from the
electric vehicle.
5
READY
CHARGE
FAULT
READY
CHARGE
FAULT
READY
CHARGE
FAULT