Machine Description; Recommended Use; Symbols And Signs - Battipav 0505 Manual De Instrucciones

GB
Warning
• For your personal safety use only accessories recommended in this instruction manual or in the relevant catalogues The use
of any other accessory or attachment other than those recommended in this instruction manual or in the relevant catalogue
may present a risk of personal injury.
Have tools repaired by qualified personnel
• This electric appliance is in accordance with the safety rules in force. Only qualified experts may carry out repairing of electric
appliances otherwise it may cause considerable danger for the user.
*
1
The noise level emitted by the machine was measured in accordance with the UNI EN12418, EN3744 standards. Measurements
were performed in the absence of load and at maximum speed using a cutting tool with a diameter of 350mm.
*
2
The machine in working conditions has a noise emission higher than 85 dB (A).
The vibration level transmitted to the hand-arm system was measured in accordance with the UNI EN ISO 5349-1 standard

MACHINE DESCRIPTION

The MIXER is a machine specifically intended for mixing tile adhesives, paints and epoxy resins. It uses the mixing action of a
whisk tool that is able to produce compounds with high hygroscopic qualities, up to a volume of 50 Lt. The operator works in front
of the containment tank, within reach of the controls. He/she starts the tool moving, adds the water and then the product to be
mixed via the whisk guard that distributes it uniformly in the bucket until mixing is complete.

RECOMMENDED USE

TOOL: BATTIPAV MIXING AGITATOR Art. SP05001 RECOMMENDED USE: tile adhesives, paints, varnish and epoxy resins.
Admissible working conditions: INTERMITTENT - S3 SERVICE

SYMBOLS AND SIGNS:

Danger/prohibition stickers are applied to the machine where necessary. Look at these prior to using the machine.
10
A1 Instruction
MANUFACTURER AND MACHINE
The nameplate shown is fitted directly on the machine. It indicates all the references and information necessary for safe operation.
9
A Machine model
B Item
C Serial number
D Power supply voltage
E Power supply frequency
F Current absorption
G Installed power rating
H Tool rotation speed
I Class of protection
L Starter capacitor
INSTALLATION
TRANSPORT
1
The machine is easy to move. Lift the handle and move the machine on its wheels.
POSITIONING
Place the machine on a stabile surface. To place the machine in working position, proceed as follows:
2
Assemble the top frame and the transporting handle. Insert the connecting pin fixing it with the safety clip.
3
Insert all the different parts in the order shown in Fig. 5, then lock everything in place using the 22 mm hexagon wrench provided.
4
Screw the agitator tightly into the motor casing.The definitive locking will take place when the machine is in motion.
5
Insert the basket into the lower frame, making sure to insert one of the four transport handles in the metal tang provided.
This will prevent the rotation of the basket during product mixing.
6
Insert the agitator by positioning it as shown in Fig. 8. Lower the motor head; at this point, the MIXER is ready for use.
PLEASE BE AWARE THAT WHEN THE MOTOR HEAD IS RAISED AN AUTOMATIC SAFETY SWITCH IS ENGAGED
PREVENTING THE OPERATION OF THE MOTOR.
THE MOTOR SHOULD ONLY BE RUN IN THE MIXING POSITION WITH THE AGITATOR INSIDE THE BASKET.
14
25%
75%
25%
Under load running
Loadless functioning
M IP Level
N Year of manufacture
O Max tool diameter
P Internal tool diameter
Q Accessories
R Accessories
S Manufacturer's name
T Manufacturer's name and address
U Certification Marks
Battipav srl