Safety Rules - Sagola 24L Manual De Instrucciones

For using safety, please read and understand this "Safety
Rules" carefully.
Please follow "This Safety Rules of the Operation Instruction".
Disassemble, repair or reconstruct this machine
by qualified technical personnel to prevent any
unusual work and injury.
Do not wipe or pour oil or water into the
machine. Moisture entering the product will
cause electric shock or wire short.
Disconnect the power source before safety
checking or cleaning to prevent electric shock
or injury.
Never use damaged power plug. Damaged plug
would result electric shock, wire short and fire.
Please don't pick up the below materials by the
machine to avoid fire, explosion or injury:
- Explosive powder: Aluminium (Al),
Magnesium (Mg), Titanium (Tn), Zinc (Zn),
etc...
- Flammable material: gasoline, organic
disolvent, lamp-oil,...
- Hot material: campfire ashes and cigarette
butt, the powder with spark: High-speed
cutting machine, grinding wheel and welding
machine,...
Never operate the product near the explosive,
flammable materiels such as lamp-oil, gasoline,
organic solvent, benzene and paint to avoid fire,
explosion or injury.
Keep children away from the product to avoid
injury.
Do not use the machine in high temperature
environment.
Stop operation when the inlet and exhaust hole
are blocked. Otherwise the machine will deform
by overheat.
Please turn off the power and disconnect the
plug while installation or maintenance to avoid
electric shock and injury.
Please unplug the idle machine to prevent
electric leakage electric shock or fire.

1. SAFETY RULES

After read this instruction, please keep in a obviously place
for reference.
110V or 220V
+ _
- 12 -
It is recommended to use power supply which
do not excess the normal voltage 220v+- 10%.
Install the filtration system and filter before using.
Otherwise, it will cause the motor breakdown.
Please keep the machine away from fire and
heat to reduce the risk of fire and wire short.
Please do not use the machine in high
temperature environment. It will cause damage,
electric shock and fire. Please use this machine
under 80% humidity.
Please do not keep the sewage and debris in
the tank for long time to prevent the odour.
Do not pick up too much dust to cause block of
the dust box or motor breakdown.
If pick up asbestos dust it is recommended to
install the microfiltration. Otherwise, the dust
will get into the motor and cause breakdown.
Empty the dust box when the bubbles or water
drops spurt from the exhaust hole.
Do not pull the wire to loosen the plug from the
outlet.
Otherwise, it may cause fire due to short circuit.
Do not bend or pull the plastic tube. Also, do
not trample on and put heavy objects on it to
prevent damage and deformation.
Do not touch the plug power or wire with wet
hands to prevent electric shock.
The life time of the filtration system is depends
on the frequency and condition of use. The life
time for machine use in dry conditions is about
1 year and in wet conditions is about half year.
Please change the filter regularly.
Hot air will exhaust from the cooling system
which at the top of the machine for normal
operation.
When the operate the machine under dry
environment (especially in winter), static
electricity may be occurred at the frame and
parts of the machine. PLEASE BE WARE.